Hague-quality-water-intl WATERMAX 60 SERIES User Manual download pdf (Page 46)

WaterMax 60 Series Owner’s Manual 11/10/2008 46

WaterMax

Filter Specifications

The following table describes the available filters.

Filter Purpose

61AAN

Removes iron and iron algae and bacteria. Reduces manganese. Also removes up to 5 ppm Hydrogen

Sulfide with the presence of 2 ppm iron. For regeneration frequency, see 61AAN WaterMax

Filter

Sizing Formula for this model.

61AAE-BWO

Removes tastes, odors and will reduce most man-made pollutants. Backwash every 3 days or as

needed. Warning: Must not be backwashed for 24 hours after installation.

61AAR-BWO

Removes suspended matter (turbidity) from water down to the 20–40 micron range. Backwash every

3 days or as needed.

61AAS-BWO

Will raise the pH of most low pH water. The mineral media must be replenished periodically to

maintain optimum bed depth for effective correction. Backwash every 2 days to prevent solidification of

mineral media.

61AAF-BWO

Removes suspended matter (turbidity) from water down to nominal 20 microns. Backwash every

3 days or as needed.

Refer to the following specifications for the WaterMax

water filtration appliances 60 series.

61AAN 61AAE-BWO 61AAR-BWO 61AAS-BWO 61AAF-BWO

Capacity (ppm)

10,000 N/A N/A N/A N/A

Sulfur H

5 N/A N/A N/A N/A

Iron (ppm)

20 N/A N/A N/A N/A

Minimum pH

7 N/A N/A 5

N/A

Media type

Manganese

Greensand

(N)

Activated Carbon

(E)

Filter Ag

(R)

Calcite/Corosex

(S)

Multi-Grade

(F)

Media amount (cu. ft.)

1.25 1 1.25 1.25 1

Cont. flow rate (gpm)

6 6 6 6 6

Peak flow rate (gpm)

10 10 10 10 12

Backwash rate (gpm)

7 5 5 7 7

Brine line flow control (gpm)

0.5 N/A N/A N/A N/A

Water Pressure

30–120 30–120 30–120 30–120 30–120

Mode settings

1 1 1 1 1

Backwash #1 (min)

5 7 7 7 7

Brine/rinse (min)

45 0 0 0 0

Backwash #2 (min)

3 0 0 0 0

Salt (lb) 3 lb salt setting=4 oz

KMnO

3 0 0 0 0

Regenerant used

4 oz KMnO

N/A N/A N/A N/A

Flow rate at 25 psi drop

16.7 gpm 21.4 gpm 21.5 gpm 20.4 gpm 19.4 gpm

Flow rate at 15 psi drop

10.5 gpm 15.9 gpm 15.9 gpm 15.2 gpm 15.1 gpm

Service flow @ pressure drop

4.5 gpm @ 4.7 psi 3.6 gpm @ 1.1 psi 4.5 gpm @ 1.5 psi 4.5 gpm @ 1.8 psi 3.6 gpm @ 1.5 psi

The 61AAS-BWO will raise the pH of most, but not all low pH water. Some water requires chemical injection using a chemical feed pump.

Caution: Follow the instructions on the KMnO

container.

For optimum water quality, do not exceed recommended service flow rate for filter media type.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Hague-quality-water-intl WATERMAX 60 SERIES User Manual Page 46

Comments to this Manuals