Hague-quality-water-intl WATERMAX 60 SERIES User Manual download pdf (Page 16)

WaterMax 60 Series Owner’s Manual 11/10/2008 16

Service Settings, Cont.

Display Meaning Possible Values Comments

Total

Regens 00000

Total number of regenerations since

Service Settings was last entered

Cannot be reset

00000–99999

Total

Gallons 00000000

Total amount of water that has

passed through the appliance since

Service Settings was last entered

Cannot be reset

00000000–99999999

Mode 1

Frequency

Operating (Regeneration) Mode Mode 1

Frequency

Mode 1

Days of the Week

Mode 2

Demand Delayed

Mode 3

Demand

See Operating Modes

section that follows

Days

Between Regenerations 0

Number of days between

regenerations

00 to 12 Displays only when in

Mode 1

Frequency

Regen

Days

SMTWTFS

YYYYYYYY

Select which days to regenerate Various combinations or Y’s

and blank spaces

Displays only when in

Mode 1

Days of the Week

Hardness

Grains 0

Hardness of the water that was

tested

003 to 999 Grains

(00000 to 99999 mg/L)

This is the actual hardness

reading and is not

compensated for iron

Iron

ppm 0

Amount of iron in parts per million of

the water that was tested

00 to 99 ppm (mg/L) This value is used to

calculate compensated

hardness automatically

Manganese

ppm 0

Amount of manganese in parts per

million of incoming water

00 to 99 ppm (mg/L) This value is used to

calculate compensated

hardness automatically

Salt Type

Sodium

Regenerant filling the brine tank Sodium

Potassium

Compensated

Hardness 00040

Compensated hardness using the

hardness, iron, and manganese

settings

Cannot be set

ppm or (mg/L)

The formula used is:

Hardness + (4 x each ppm

iron) + (4 x each ppm

manganese) =

compensated hardness

Capacity

Grains 2

8730

The desired capacity number 00000 to 99999 Grains

(0000 to 9999 gm)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Comments to this Manuals

No comments

Hague-quality-water-intl WATERMAX 60 SERIES User Manual Page 16

Comments to this Manuals